Low Alloy Steel Powder

Low alloy steel powder normally contains small amounts (typically <5%) of elements like molybdenum, chromium, nickel or vanadium etc. These enhance strength, hardness or toughness while maintaining cost-effectiveness. They can be used in pressing and sintering (P/M), 3D printing and MIM etc.

our common production process for stainless steel includes Gas Atomizing process (GA), Water Atomizing process, Cabonyl process & Plasma Rotating Electrode Process (PREP).

Powder Shape

Gas Atomization LOW ALLOY STELL POWDER
Gas Atomization
PREP LOW ALLOY STELL POWDER
PREP
Water Atomization
Water Atomization
Carbonyl
Carbonyl

Chemical Composition

Item Fe C Cr Ni Mo Si Mn
Pure Fe 99.9 / / / / / /
Q355 Bal <0.2 <0.3 <0.3 / <0.55 <1.6
4140 Bal 0.38-0.43 0.8-1.1 / 0.15-0.25 0.15-0.35 0.75-1.0
4340 Bal 0.38-0.43 0.7-0.9 1.65-2.0 0.2-0.3 0.15-0.35 0.6-0.8
1045 Bal 0.42-0.5 / / / <0.55 0.6-0.9
52100 Bal 0.98-1.1 1.3-1.6 / / 0.15-0.35 0.25-0.45
SCM415 Bal 0.12-0.18 0.9-1.2 / 0.2-0.5 0.15-0.35 0.5-0.8
42CrMo Bal 0.38-0.45 0.9-1.2 / 0.15-0.25 0.17-0.37 0.5-0.8
2.25Cr1Mo Bal 0.07-0.12 2.3-2.7 <0.02 0.9-1.2 0.4-0.7 0.4-0.7
30CrMnSiNi2 Bal 0.27-0.38 0.9-1.2 1.4-1.8 / 0.9-1.2 1.0-1.3

Powder Properties

Size Cuts (um) D10 (um) D50 (um) D90 (um) Flowability (s/50g) Apparent Density (g/cm³)
53-150 48-58 95-110 145-160 20.0 max. 4.0 min.
45-105 54-60 70-80 95-115 20.0 max. 4.0 min.
15-53 15-23 32-38 52-58 20.0 max. 4.0 min.
15-45 15-20 26-32 42-51 20.0 max. 4.0 min.
0-30 5-10 12-18 22-30 / 4.0 min.

Customized particle size distribution available upon request.

Detailed test data are reported in Certificate of Analysis for each order.

Packaging

TRUER powders are available in 1, 2, 5, 10 and 25kg packages, or required, packed by plastic bottle filled with inert gas or vacuum.

More Powders

CuCrZr Powder

TRUER SPHERE – CuCrZr – C18150 CuCrZr powder (C18150)(CW106C) is a precipitation-hardened copper-chromium-zirconium alloy offering an exceptional balance of high electrical conductivity and mechanical strength in copper alloy.   It is specially for rocket engine combustion chambers, high-performance electrical connectors and circuit contacts to produce complex shape additive manufacturing (3D

Read More »

Magnetic Powder

Magnetic Powder Soft magnetic powders are typically iron based alloy blended with elements like Si, Ni, Co or Al to optimize magnetic performance, including Fe-Si, Fe-Ni, Fe-Co series and also amorphous /nanocrystalline alloys by adding boron or phosphorus offering ultra-low core loss. The production method of our soft magnetic alloy

Read More »

Water Atomised Iron & Prealloy Steel Powder

Water Atomised Iron & Prealloy Steel Powder Water atomised iron powder involves melting iron and dispersing it into fine droplets using high-pressure jets of water (water atomization). Then these droplets solidify into powder particles. Water atomization produces irregularly shaped particles because water has higher viscosity and impact force compared to

Read More »

CuSn12Ni2 Powder

TRUER SPHERE – CuSn12Ni2 – C012N CuSn12Ni2 powder is a lead-free and upgraded bronze alloy powder composed of 12% Tin and 2% Nickel with better strength and corrosion resistance than CuSn10 which is more ideal for high-performance bearings marine components and additive manufacturing (3D printing) parts and wear-resistant coatings. In

Read More »

Nickel Alloy Hastelloy B powder

TRUER SPHERE – N030M – Hastelloy B Nickel Alloy Hastelloy B powder-Nickel Alloy N030B, also known as HB, Hastelloy B, UNS N10675, DIN 2.4600, 00Mo30Ni65Fe2Cr2, can function under very high temperatures and in extreme mechanical stress conditions, and also where high surface stability is required. They have good creep and oxidation

Read More »

Hastelloy C22 Powder

TRUER SPHERE – Hastelloy C22 – N0022 Nickel Alloy powder Hastelloy C22 powder is a nickel-molybdenum-chromium-tungsten superalloy powder, known as its exceptional corrosion resistance. Hastelloy C22 can maintain strength and oxidation resistance up to 1200℃ which is widely used in thermal spray coatings. It is also suitable for other additive

Read More »

Pure Ni Powder

TRUER SPHERE – Pure Ni – N0000 Pure Ni Powder-Nickel powder can be used to manufacture stainless steel and other corrosion-resistant alloys, such as nickel steel, nickel chromium steel and various non-ferrous metal alloys. For additive manufacturing application, our common production process for pure nickel powder is Gas (argon or nitrogen)

Read More »

Brazing Powder

Brazing Powder Brazing powders, including nickel based, copper based and aluminium based alloy powders. Comparable with Cu based and Al based brazing powders, Ni based brazing powders has better high temperature performance and high thermal conductivity, and corrosion resistance suitable for marine or chemical industry electronics, but higher melting points

Read More »

Tungsten Carbide Powder WC

Tungsten Carbide Powder WC Tungsten Carbide powder is a ceramic-metallic (cermet) powder composed of WC grains, widely used in hardmetals, wear-resistant coatings, cutting tools and additive manufacturing. WC is one of the hardest materials and is often combined with metallic binders like Co, Ni to form cemented carbide. Pure WC

Read More »