TRUER SPHERE – CuNi2SiCr – C0002
CuNi2SiCr powders can be used for complex parts of bearing or bushing by additive manufacturing. It is better than pure copper and brass for bearing. Its As-built strength of SLM can reach 307 MPa (reported by TRUER RP202205200197) at built rate 13.0 cm³/h with 390W/30um.
CuNi2SiCr is a precipitation-hardened copper alloy composed of copper, nickel, silicon and chromium. It has good balance of strength and electrical conductivity and excellent thermal stability. Its strengthening of CuNi2SiCr is based on the temperature-dependent solubility of the intermetallic phases Ni2Si and Ni5Si2 (Ni31Si12). Its mass density can reach 8.84 g/cm3.
Our spherical CuNi2SiCr powder can be produced by both Gas atomizing and PREP process with good flowability and sphericity.
Chemical Composition
| Element | Specification (wt%) |
|---|---|
| Cu | Bal. |
| Ni | 1.8–3.0 |
| Si | 0.4–0.8 |
| Cr | 0.2–0.7 |
| Fe | 0.05 max. |
| O | 0.05 max. |
Powder Shape
| Process | Sphericity (%) |
| GA | >90 |
| PREP | >95 |
Powder Properties
| Process | Size Cuts (um) | D10 (um) | D50 (um) | D90 (um) | Flowability (s/50g) | Apparent Density (g/cm³) |
|---|---|---|---|---|---|---|
| DED/LC/TSW | 53-150 | 55-64 | 92-104 | 140-160 | 20.0 max. | 4.4 min. |
| SLM | 20-63 | 22-27 | 35-42 | 58-65 | 20.0 max. | 4.4 min. |
| LPBF/SLM | 15-53 | 15-24 | 26-40 | 42-58 | 20.0 max. | 4.4 min. |
| LPBF/SLM/PTA | 15-45 | 16-20 | 27-32 | 47-51 | 20.0 max. | 4.4 min. |
Customized particle size distribution available upon request.
Detailed test data are reported in Certificate of Analysis for each order.
Packaging
TRUER SPHERE AM powders are available in1, 2, 5, 10 and 20kg, packages, or required, packed by plastic bottle filled with inert gas or vacuum.
NiCr Powder
TRUER SPHERE – Nichrome Powder – NiCr powder Nichrome is a silver gray metallic powder and well-known NiCr powder with 80% Nickel and 20% Chromium. NiCr powder, including 80/20, 70/30, 60/40, 50/50, is a hardfacing alloy that is used to help withstand high levels of corrosion, wear, or heat. Drill
CoNiCr Powder
TRUER SPHERE – H0001 CoNiCr Powder High-Entropy Alloy (HEA) powder is technical expertise of Truer. We mainly engaged in the R&D and production of high-entropy alloy powder for high-end 3D printing by the production process of VIGA, EIGA and PREP. High entropy alloy (HEA) are defined as alloys that have
Hastelloy C22 Powder
TRUER SPHERE – Hastelloy C22 – N0022 Nickel Alloy powder Hastelloy C22 powder is a nickel-molybdenum-chromium-tungsten superalloy powder, known as its exceptional corrosion resistance. Hastelloy C22 can maintain strength and oxidation resistance up to 1200℃ which is widely used in thermal spray coatings. It is also suitable for other additive
Low Alloy Steel Powder
Low Alloy Steel Powder Low alloy steel powder normally contains small amounts (typically <5%) of elements like molybdenum, chromium, nickel or vanadium etc. These enhance strength, hardness or toughness while maintaining cost-effectiveness. They can be used in pressing and sintering (P/M), 3D printing and MIM etc. our common production process
Nickel Alloy Monel 400 powder
TRUER SPHERE – N0400 – Monel 400 Nickel Alloy Monel 400 powder-Monel 400 (UNS N04400, DIN Nr. 2.4360, NiCu30) is a nickel-copper solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments, sea
Nickel Alloy Nitinol NiTi50 powder
TRUER SPHERE – N0050 – Nitinol Powder Nitinol (NiTi50) alloys typically(Nickel Alloy Nitinol NiTi50 powder) are shape memory alloys which has the ability to undergo deformation at the specified temperature, then recover its original shape. And It also exhibits super elasticity which can immediately return to its under-formed shape upon removal
Aluminium Alloy Powder
Aluminium Alloy Powder Aluminium alloy powder consists of aluminium alloyed with elements such as copper, magnesium, silicon, zinc or others for enhanced strength, corrosion resistance. Common examples including AlSi10Mg, 6061, 7075, 7050, AlSi12, 2024, 5052 and AlMgSc etc. AlSi10Mg, 6061, 2024 and 7075 are widely used in selective laser melting
Thank You
Thank You ! We have received your inquiry and will contact you ASAP Urgent Needs？Call Technical Team Directly ! +86-15250232891
Nickel Alloy N0738 powder
TRUER SPHERE – N0738 Nickel Alloy N0738 powder, common name Inconel 738, UNS N07738, is a precipitation hardenable nickel-base alloy possessing excellent high temperature creep-rupture strength combined with hot corrosion resistance superior to that of many high-strength superalloys of lower chromium content. It is designed to provide the gas turbine
