Brazing Powder
Brazing powders, including nickel based, copper based and aluminium based alloy powders.
Comparable with Cu based and Al based brazing powders, Ni based brazing powders has better high temperature performance and high thermal conductivity, and corrosion resistance suitable for marine or chemical industry electronics, but higher melting points requiring higher soldering temperatures.
Nickel based brazing powders are applied in vacuum brazing and gas protection brazing of various carbon steels, stainless steels, super alloys and tungsten carbides.
Copper based brazing powder is applicable to all kinds of flame brazing, resistance brazing, high-frequency brazing and furnace brazing between various copper and copper alloys.
Aluminium based brazing powder is suitable for the welding of aluminium-stainless steel, aluminium-aluminium.
Our brazing powders are produced by gas atomization process with spherical morphology. Particle size can be customized as per customer requirements.
Morphology of CuNi5Sn7 Powder
Morphology of AlSi10Mg Powder
Morphology of BNi-5 Powder
Chemical Composition (wt%) - Ni based
| Item | Ni | Cr | B | Si | Fe | C | P | Mn | Cu |
|---|---|---|---|---|---|---|---|---|---|
| BNi-1 | Bal | 14 | 3.1 | 4.5 | 4.5 | 0.7 | / | / | / |
| BNi-2 | Bal | 7 | 3.1 | 4.5 | 3 | / | / | / | / |
| BNi-3 | Bal | / | 2.9 | 4.5 | 0.5 | / | / | / | / |
| BNi-4 | Bal | / | 2.0 | 3.5 | 1.5 | / | / | / | / |
| BNi-5 | Bal | 19 | / | 10 | / | / | / | / | / |
| BNi-6 | Bal | / | / | / | / | / | 11 | / | / |
| BNi-7 | Bal | 14 | / | / | / | / | 10 | / | / |
| BNi-8 | Bal | / | / | 7 | / | / | / | 23 | 4.5 |
Chemical Composition (wt%) - Cu based
| Item | Cu | P | Sn | Ni | Particle Size (um) | Brazing Temperature (℃) |
|---|---|---|---|---|---|---|
| Cu93P7 | 93 | 7 | / | / | 0-75um, 0-45um | 743-840 |
| Cu86P7Sn7 | 86 | 7 | 7 | / | 0-75um, 0-45um | 700-750 |
| Cu88Ni5Sn7 | 88 | / | 7 | 5 | 0-75um, 0-45um | 890-900 |
Chemical Composition (wt%) - Al based
| Item | Al | Si | Mg | Cu | Zn | Particle Size (um) | Brazing Temperature (℃) |
|---|---|---|---|---|---|---|---|
| AlSi5 | Bal | 5 | / | / | / | 0-150um, 0-45um | 575-630 |
| AlSi8 | Bal | 8 | / | / | / | 0-150um, 0-45um | 575-615 |
| AlSi10 | Bal | 10 | / | / | / | 0-150um, 0-45um | 575-590 |
| AlSi12 | Bal | 12 | / | / | / | 0-150um, 0-45um | 575-585 |
| AlSi12Cu4 | Bal | 12 | / | 4 | / | 0-150um, 0-45um | 520-585 |
| AlSi10Mg | Bal | 10 | 1 | / | / | 0-150um, 0-45um | 555-590 |
| AlSi12Mg | Bal | 12 | 1 | / | / | 0-150um, 0-45um | 559-579 |
| AlSi10Zn3 | Bal | 10 | / | / | 3 | 0-150um, 0-45um | 576-588 |
| AlSi12Zn3 | Bal | 12 | / | / | 3 | 0-150um, 0-45um | 576-609 |
Detailed test data are reported in Certificate of Analysis for each order.
Packaging
TRUER powders are available in 1, 2, 5, 10 and 25kg packages, or required, packed by plastic bottle filled with inert gas or vacuum.
- Typical COA (Certificate of Analysis)
Hastelloy C22 Powder
TRUER SPHERE – Hastelloy C22 – N0022 Nickel Alloy powder Hastelloy C22 powder is a nickel-molybdenum-chromium-tungsten superalloy powder, known as its exceptional corrosion resistance. Hastelloy C22 can maintain strength and oxidation resistance up to 1200℃ which is widely used in thermal spray coatings. It is also suitable for other additive
Nickel Alloy N0738 powder
TRUER SPHERE – N0738 Nickel Alloy N0738 powder, common name Inconel 738, UNS N07738, is a precipitation hardenable nickel-base alloy possessing excellent high temperature creep-rupture strength combined with hot corrosion resistance superior to that of many high-strength superalloys of lower chromium content. It is designed to provide the gas turbine
Tungsten Carbide Nickel Powder WC-Ni powder
Tungsten Carbide Nickel Powder WC-Ni Tungsten Carbide Nickel (typical type WC-10Ni) is a cemented carbide (hardmetal) composite powder consisting of tungsten carbide (WC) particles bonded with nickel (Ni) matrix. It offers a balance of high hardness (1200-1800 HV) due to tungsten carbide phase and toughness due to nickel matrix. WC-Ni It
CuSn10 Powder
TRUER SPHERE – CuSn10 – C0010 CuSn10- powder – CuSn10 (SAE 660) or CuSn12 or CuSn20 is a pre-alloyed bronze powder composed of copper and tin. It is widely used in powder metallurgy, additive manufacturing (3D printing), welding or surface coating. It has high density 8.8g/cm3 (varies with processing) and
Magnetic Powder
Magnetic Powder Soft magnetic powders are typically iron based alloy blended with elements like Si, Ni, Co or Al to optimize magnetic performance, including Fe-Si, Fe-Ni, Fe-Co series and also amorphous /nanocrystalline alloys by adding boron or phosphorus offering ultra-low core loss. The production method of our soft magnetic alloy
Triballoy Series Cobalt-Based Alloy Powder
Stellite Series Spherical Cobalt-Based Alloy Powder Triballoy Series Cobalt-Based Alloy Powder—Tribaloy series alloy is a family of cobalt-based alloys known for their excellent wear resistance and corrosion resistance, particularly in high temperature. These alloys are often used in applications where metal-to-metal wear, galling and seizing are concerns. Stellite alloys typically
NiCr Powder
TRUER SPHERE – Nichrome Powder – NiCr powder Nichrome is a silver gray metallic powder and well-known NiCr powder with 80% Nickel and 20% Chromium. NiCr powder, including 80/20, 70/30, 60/40, 50/50, is a hardfacing alloy that is used to help withstand high levels of corrosion, wear, or heat. Drill
CoNiCr Powder
TRUER SPHERE – H0001 CoNiCr Powder High-Entropy Alloy (HEA) powder is technical expertise of Truer. We mainly engaged in the R&D and production of high-entropy alloy powder for high-end 3D printing by the production process of VIGA, EIGA and PREP. High entropy alloy (HEA) are defined as alloys that have
Nickel Alloy Nitinol NiTi50 powder
TRUER SPHERE – N0050 – Nitinol Powder Nitinol (NiTi50) alloys typically(Nickel Alloy Nitinol NiTi50 powder) are shape memory alloys which has the ability to undergo deformation at the specified temperature, then recover its original shape. And It also exhibits super elasticity which can immediately return to its under-formed shape upon removal
